1.8 x .900 Featheredge Gate Domed (71″ x 35 1/2″)

A F

1.8 x 900 domed featheredge gate manufactured to provide a strong, durable, and visually attractive solution for garden entrances, side access, and boundary fencing. Measuring approximately 1800mm x 900mm (71″ x 35½”), with the height taken to the top of the dome, this gate offers full privacy alongside a decorative curved finish that enhances traditional fencing installations.

Each 1.8 x 900 domed featheredge gate is constructed using tanalised feather edged boards, providing excellent resistance to rot, fungal decay, and insect attack. The timber is pressure treated to ensure long-term protection, making the gate suitable for year-round outdoor use in a wide range of environments. This treatment helps extend the lifespan of the gate while keeping maintenance requirements to a minimum.

The gate is built with a traditional ledged and braced framing system on the rear. Horizontal ledges provide strength across the width of the gate, while the diagonal brace helps counteract sagging over time. This proven construction method is widely used for timber gates and ensures the featheredge boards remain well supported during everyday use.

Featheredge boards are overlapped during construction to create a solid and private gate face. This overlapping design helps reduce visibility through the gate while improving resistance to wind. It also allows rainwater to run off the surface more effectively, contributing to the long-term durability of the gate.

The domed top is the defining feature of this gate. The curved profile softens the overall appearance and adds a decorative finish compared to a flat top design. The stated height of 1.8 metres is measured to the highest point of the dome, making this gate ideal for installations where a consistent overall height is required while still benefiting from a more traditional and elegant look.

This domed featheredge gate is commonly used for side entrances, garden access points, and boundary fencing where privacy and security are important. The 900mm width provides comfortable pedestrian access while maintaining a strong and well-supported structure that integrates neatly into featheredge fencing runs.

Customers must specify which side the hinges are to be fitted on, depending on whether the gate will be hung from the left or the right. This ensures the ledged and braced construction is oriented correctly, allowing the diagonal brace to support the weight of the gate effectively and helping prevent long-term sagging. Correct hinge orientation is essential for smooth operation and durability.

This gate can be hung between timber posts or used with suitable concrete or steel posts when appropriate fixings are selected. The solid construction allows for the use of heavy-duty hinges and gate furniture, ensuring reliable performance when installed correctly.

For best results, the gate should be installed with appropriate ground clearance to allow for drainage and seasonal movement. Posts should be securely set and remain plumb, as correct installation plays a key role in maintaining alignment and ensuring the gate opens and closes smoothly over time.

The natural timber finish allows the gate to blend seamlessly with existing featheredge fencing and garden features. It can be left to weather naturally or finished with a suitable exterior paint or stain if a specific appearance is desired. Any additional finishes should be compatible with pressure-treated timber to maintain the effectiveness of the tanalisation.

This 1.8 x 900 domed featheredge gate is suitable for both domestic and trade use. It can be supplied as part of a new fencing installation or used as a replacement gate where an existing access point needs upgrading. Its traditional design makes it suitable for a wide range of garden styles, from modern layouts to more classic settings.

The gate offers a practical balance between strength, privacy, and appearance. Its ledged and braced construction provides dependable structural support, while the featheredge boards and domed top deliver a solid and visually appealing finish.

If you are looking for a full-height timber gate that combines privacy with a decorative curved top, the 1.8 x 900 domed featheredge gate provides a reliable solution. Manufactured from tanalised timber with traditional ledged and braced framing, and supplied with the option to choose left or right hand hanging, it can be specified to suit a wide range of garden access requirements.

ully tanalised Ledged & Braced Featheredge gate, built to order or any size you may require, the pice is based on 1.8 to the highest point and 900 wide.